• PP-2K 9mm Gas Blow Back Submachine Gun(with CO2 magazine)
  • PP-2K 9mm Gas Blow Back Submachine Gun(with CO2 magazine)
  • PP-2K 9mm Gas Blow Back Submachine Gun(with CO2 magazine)


Weight 1.3 KG Length Min./ Max 590 mm / 370 mm
Inner Barrel Length 150 mm Inner Barrel Caliber 6.03 mm
Pellet 6 mm Magazine Capacity 22 rds


Based on the classic Russian PP-2000, the PP-2K has been revived on an airsoft rifle that is sure to be a rage among players favoring Russian guns. 


Modify's PP-2K is made 1:1 scale to the PP-2000, with functions similar to the legendary Russian gun. 


Weighing 1.35kgs and 580mm long, the PP-2K has safety, semi-auto, and automatic firing modes. Its steel buttstock is foldable and can be replaced with an extra-long magazine. 


With the 1913 Picatinny scope rail, it accepts all wide and narrow fixtures on the market. 


Its 150mm, hardened, anodized inner barrel and the newest Predator hop up bucking from Modify help to achieve commendable airtightness and accuracy. 


The pull operates with the gun mechanism to simulate real-gun action when firing. And the pull can be turned right or left to suit each player. 


The all-steel trigger mechanism vastly improves the durability of the trigger mechanism; while the nozzle has an enlarged opening to improve recoil. 


The lower body accepts a dedicated flashlight and the muzzle has a 14-counter-thread, removable muzzle device, which can be replaced with a dedicated silencer or 14-counter-thread silencer available on the market.

Included: PP-2K x1, Short CO2 magazine x1, Plastic box x1



Proper operation of PP-2K

DO NOT charge the bolt with the safety on. Removing the magazine first after shooting a full clip before changing the shooting mode. The improper operation causes excessive wear or breakage of internal parts.

Knocker spring fatigued and malfunction

Without removing the magazine after using the PP-2K results in extended contact between the knocker spring and magazine. This causes fatigue of the spring to impact the firing efficiency and durability of the spring. So always remove the magazine after using the PP-2K to avoid such problems.